10 Ways to Turn on the Right Hand Tractor Engine
22 February 2023
Before knowing how to start a hand tractor engine, make sure you have a good understanding of how this machine works. yous are advised to read the user manual to find out how to do it and what equipment needs to be prepared.
Also, ensure that the you's hand tractor engine is filled with sufficient fuel and water so that the engine's performance, when turned on can be optimal. After that, follow simple steps to start the hand tractor engine and enjoy more efficient work results. Immediately see the full information below!
How Does a Hand Tractor Machine Work?
A hand tractor machine is an agricultural tool that is used to help farmers work, such as tilling the land, weeding, and mixing or mixing fertilizers (mixing). Starting a hand tractor engine can be a confusing task for first-time owners.
However, by understanding a few simple steps, you can easily start the engine of the hand tractor. Before that, let's get to know how this one-hand tractor machine works.
A hand tractor's engine can only start when it has full fuel and is within specification. Of course, each hand tractor machine also has a different RON, depending on the brand and model you use.
RON 90 fuel will likely be used if the engine is of high quality. Then later, the fuel will be immediately disbursed by the fuel heating system so that the engine works optimally.
2. Combustion System
The heated fuel is mixed with clean air and enters the combustion chamber inside the engine. This combustion chamber is where the combustion process occurs between fuel and clean air to generate the pressure and heat the engine needs.
3. Engine (Machine)
After the combustion process is carried out, power will be available to rotate the crankshaft. Finally, the power will run the engine and move the transmission as well as the hydraulics.
The transmission sends power from the engine to the wheels and allows the engine to move them at different speeds.
So when the transmission starts to get power, the engine rotation will be converted into wheel rotation so that the load can be transferred properly. Transmission is necessary so that the hand tractor engine can move freely.
5. Hydraulic System
The hydraulic system in the hand tractor engine functions as a tool to transmit mechanical power into hydraulic power. This helps the operator control additional equipment such as digging the earth, mowing grass or shifting loads.
Hydraulic pumps convert mechanical power from the engine into hydraulic power by pumping hydraulic fluid (usually oil) through the system.
Hydraulic valves open and close the flow of hydraulic fluid through the system according to instructions received from the operator. This helps the operator control the flow of hydraulic fluid and determine the direction and amount of power that is transmitted to additional equipment.
The wheels in a tractor play an important role in moving the machine and helping to complete required tasks such as plowing the land, moving loads or harvesting crops.
The wheels are driven by engine power through the transmission. Then the transmission will transmit power from the engine to the wheels and allow the engine to move at different speeds, such as low speed for plowing the land and high speed for moving the load.
When the wheels rotate, the machine can move forward or backwards and change direction based on the wheel position and ground conditions. The wheels also have a braking system to help control the machine and ensure user safety.
Read also: Parts of Hand Tractors You Need to Know
What Needs to Be Done Before Starting the Hand Tractor Engine?
Before starting the hand tractor engine, several things must be done to ensure the machine works properly and safely. Here are some things to do:
Read the user manual: Make sure you read the user manual before starting the hand tractor engine. This will provide information about how the machine works, how to operate it, and the required tools.
Make sure there is fuel: Hand tractor engines need fuel to operate. Make sure the fuel tank is filled with enough so that it can function optimally.
Check engine condition: Before starting the hand tractor engine, check the condition of the machine and equipment so that problems do not occur in the middle of the use process.
Check equipment: Ensure the equipment to be used is properly installed and secure.
Ensure the work area is clean: Ensure the work area is clean and free from objects that may interfere with or harm the hand tractor engine.
Make sure the operator is wearing protective equipment: The operator alias you as a user must wear eye protection, ear protection, and gloves for safety when starting the hand tractor engine.
Read also: 2 Types of Tractors based on their Functions
How To Start A Hand Tractor Engine?
Honda Power has 2 types of hand tractor engines that you can use to help complete agricultural work: the Cultivator-FJ500 and Tiller-F300. But this time, you will be invited to see how to turn on the Cultivator-FJ500. Immediately follow the steps as follows:
Take your FJ500 tractor engine out of the garage or other enclosed place. This is important because the exhaust gas from the tractor engine is hazardous to be inhaled into your body.
If so, make sure all components and machines are in good condition.
After the inspection, you can turn the transmission lever to the neutral position.
Turn the fuel tap to the ON position.
Pull the choke knob to the CLOSE position to start the engine when cold. However, you can leave the choke knob in the OPEN position to start the engine while it is still hot.
Move the machine switch to the ON position.
Slide the throttle lever away from the SLOW position. Roughly about ⅓ of the way to the FAST position.
Start pulling the starter handle slowly until you feel a repulsion. Then pull one more time abruptly.
If the choke knob is pulled to the CLOSE position to start the engine, slowly slide it to the OPEN position as the engine warms up.
How to start a hand tractor engine is never difficult as long as you read the manual carefully. Like how to turn on the Cultivator-FJ500, which has been explained above, it's quite easy, right?
If you need other helpful information, visit Honda Power. Then you can also see tools to help other agricultural work through the same website.